[trxn]

Installed Tein Flex Z Coilovers. I really wanted to be lower especially in the front. I completely maxed out the coils on the lowest setting without removing any of the collars. I want to go lower but I think this is the best ride height for daily driving. I do scrape on stuff though but not too crazy but my lip and under panels are taking a beating. The is tad stiffer than the RCE lowering springs but these are adjustable so I could go full comfort mode.

Settings:
7 clicks front and 8 click rear from full stiff
Clockwise is full stiff

Note from Andrewtech Automotive where I got an alignment after: rear camber cannot hit target. ISC arms is adjusted to the max. Will need adjustable toe arms. I reached out to ISC to see the minimum camber I can achieve and turns out the shortest length of the LCA is the length of the stock LCA...kinda disappointed. Might have to get another alignment and increase the front camber to be 0.5 more than the rear.