Quote:
Originally Posted by FrickingReallySlow
Check out the sticky in the software tuning thread where ppl post their datalogs and you can compare
https://www.ft86club.com/forums/showthread.php?t=47754
But what I can see is if you look at "total fuel quantity" between your two logs, they reach different peaks 33 (MAF) vs 43 (NO MAF) during the beginning of cold start. So it seems to be a fueling difference which could be caused by MAF.
Did you get the starter fluid yet |
I totally forgot about the starter fluid. I do have some and did just try to spray some starter in the intake. The car stays on alot longer with the starter fluid in the intake. It was about 10 seconds of run time then just shuts down after the fuel is burned.
I went to check the fuel pump, and i can for sure hear it prime. I did check the connectors were tight as well.
I will probably pull the fuel pump and at least change the fuel filter.
Quote:
Originally Posted by NoHaveMSG
Weird how on the log it runs for 6-7 seconds it has no stft, ltft, AFR stays the same, ect.
|
Yea i saw that as well.
I'll try to do more datalogs to get actual data for those parameters hopefully.