Quote:
Originally Posted by jrhudson
Yea thanks, ive seen that. Ive also seen another thread about a user on the site that had my issue and went with the shims that gave him intake ~.15mm and exhaust ~.25mm
|
You measure your valve clearance, then you
Can measure shim thickness with calipers. Then add/subtract shim thickness to get the correct clearance.
So if you want .15mm but you have a valve that measures .10mm. You measure the shim and it is 2.45mm. That means you need a 2.40mm shim. You can’t just use the shim thickness from somebody else’s build and call it good.
Sent from my iPhone using Tapatalk