Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Abdullah-1997 · 07-11-2021, 07:57 AM

Hello guys..

I found similar cases to mine in the forum but never found exact conditions.

I have a 2016 BRZ and the ABS, CE and traction lights came on along with the speedometer not working.
This happend after I got my tyres changed and did an alignment. When I turn the car off and on again, all lights turn off except CE and the speedometer works again. However, after few miles all light come back on.
I took it to a local Subaru specialist shop and we scanned the ECU and cleared the codes after checking and cleaning all of the speed sensors. Unfortunately, lights came back after around 20 miles.
I am running a higher wall tyers in the rear, could this be the problem?
I doubt it because it had the same size tyres prior to the current ones and everything was good for around 6000 miles.

Any Idea?

07-11-2021, 07:57 AM	#1
Abdullah-1997 Junior Member Join Date: Jul 2021 Drives: Blue 2016 BRZ MT Location: Middle East Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Traction, ABS and CE lights on Hello guys.. I found similar cases to mine in the forum but never found exact conditions. I have a 2016 BRZ and the ABS, CE and traction lights came on along with the speedometer not working. This happend after I got my tyres changed and did an alignment. When I turn the car off and on again, all lights turn off except CE and the speedometer works again. However, after few miles all light come back on. I took it to a local Subaru specialist shop and we scanned the ECU and cleared the codes after checking and cleaning all of the speed sensors. Unfortunately, lights came back after around 20 miles. I am running a higher wall tyers in the rear, could this be the problem? I doubt it because it had the same size tyres prior to the current ones and everything was good for around 6000 miles. Any Idea?