|
Which connector? The plug at the coil pack has 3 wires. Brown w/white stripe is keyed 12vdc hot. Black w/white stripe is chassis ground. The 3rd is colored and is the ECM trigger, on pack 1 it is blue w/yellow stripe I believe on my 13'. You can test this by pulling the connector and probing for continuity. The one that has chassis ground is, well ground. Key on check which one has 12vdc. The other will be your trigger. Then correspond to the AC1 connector. The only AC1 pinout I could find was for a 15' but did not give wire colors.
__________________
"Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward." -Oscar Wilde.
|