|
Going to echo what others have said so far. Start with the car off, then plug your cable into the OBD2 port. The tablet will power on just fine.
From there, any time it says to "Key on and confirm" make sure you only turn the key to the On position. Don't start the engine.
If it's still not working make sure the cable is seated fully in the tablet and in the OBD2 port. If you're still having trouble then there could be an issue with the cable or the tablet itself.
Also make sure that you downloaded the right tuning files for your model of ECU, which you should have checked using the tablet before downloading files that will match that ECU model number.
__________________
-O/D
2016 FR-S, Hot Lava
|