|
Just wanted to let folks know that I resolved my wheel speed sensor issue. I had replaced both the wheel speed sensor and the wheel bearing, but was still seeing the issue with the wheel speed sensor not being read properly. I was pulling the P0500 with Torque + bluetooth adapter, but I learned that it only pulls the generic DTC codes and you needed a better device to pull the vehicle specific DTC codes. So, I ordered a Autel MaxiLink ML629 scan tool and saw that I bad both current and previous DTC codes, which I cleared with the scan tool. After clearing the codes, I was able to read the vehicle speed codes with the RaceCapture Track mk2. I'm unclear if the issue would of resolved itself if I just drove the car around enough. I'm going to take the car for a drive after dinner tonight to make sure the wheel speed sensor issue doesn't pop back up again.
|