View Single Post
Old 06-23-2021, 09:34 AM   #4405
CrowsFeast
Senior Member
 
CrowsFeast's Avatar
 
Join Date: Jun 2019
Drives: 2013 BRZ Sport-Tech
Location: Toronto
Posts: 355
Thanks: 184
Thanked 179 Times in 121 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by ACT86 View Post
Thanks heaps for the response mate, greatly appreciated.

I had picked 45-47 for the front after seeing 18x8.75 ET35 and 18x9.5 ET40s on the front of some other cars here. Both of these had more poke than I was after, even after lowering / camber.

I thought ET45 on a 9” front would be ok once lowered as this is still further from the strut than the 18x9.5 ET40 (and similar to an 18x9.5 ET38 which seems quite common), but offers quite a bit less poke. Many of the 18x9.5 ET38/40 listed in the meaty tyres thread have 255/265s fitted to the front, so I assumed I’d be ok with a 245/35.

Sounds like I might need to do a bit more research based on the above - I’ll ditch the ET47 option at least. My other option is to fit 8.5s to the front, but I’d really prefer not to stagger.
I put 17x9 +40 wheels with 255/40R17 RS4's on front and back for my track setup. Running stock struts, camber plates maxed, and camber bolts, getting 3.2* camber up front. I had to put a 3mm spacer on the fronts in order to clear the strut. There's no poke at the top.
CrowsFeast is offline   Reply With Quote
The Following User Says Thank You to CrowsFeast For This Useful Post:
ACT86 (06-23-2021)