View Single Post
Old 05-18-2021, 01:28 PM   #6
TommyW
Senior Member
 
TommyW's Avatar
 
Join Date: Feb 2017
Drives: '13 Whiteout
Location: San Clemente
Posts: 1,493
Thanks: 496
Thanked 1,245 Times in 674 Posts
Mentioned: 10 Post(s)
Quote:
Originally Posted by ZDan View Post
Stock non-adjustable sways, front camber at -3.5/-3.9.
Springs are Swift Spec-R: 4.4 F, 5.3 R (kg/mm), Bilstein B8 struts/shocks.
Car is 1.25" lower than stock all around. I think I'm soft enough that I'm riding on the outside front bump stop during hard cornering.
The camber seems about as much as you'd want. Ultimately you want to work on the end that is troublesome however it sounds like you've done about all you can do with the front of the car. At that point the rear needs to be considered. Balance is balance. Even though you'd be taking grip from the rear you may reduce push enough to make it worth it.
TommyW is offline   Reply With Quote