[Tcoat]

Originally Posted by FR-S2GT86

Not rushing you or anything, just trying to help a fellow twin owner out, but if you were to take these two harnesses indicated in the pictures here,

Attachment 200665

Attachment 200666

which can both be found on Metra's website,

Attachment 200663

Attachment 200664

and if you were to solder them together matching the pin positions on each molex plug to make an extension harness, you won't have to cut any of your cars' wires for that test that I wrote up for you about a week ago in post #61 of this thread:

https://www.ft86club.com/forums/show...07#post3429607

All you would have to do is not connect the blue wires together in the extension harness, and would have to cut and/or de-pin the blue jumper wires out of that harness within.

I'm thinking of ordering the two harnesses and making this test harness myself. If you'd like to have it when I'm done with it, I'll send it to you, free of charge and I'll pay the shipping.

I'd be up to a solution that doesn't show evidence of tampering. It isn't maintaining the warranty on the HU it self that concerns me since if caused the issue I wouldn't claim it anyway. It is giving them an excuse to not cover something else. Don't think my dealer would give me any grief no matter what I did but I would hate to be away from home and have to get work done just to be told no.