[fibber1200]

Originally Posted by Ro_Ja

Adding Bilstein B14 adjustable coilovers and Cusco rear lower control arms. . Probably 20k-ish miles on them.

The Bilsteins include non-raising adjustable camber mounts from HVT (now Inertia Labs) on the fronts only. The rears have the stock OEM rubber top mounts.

The HVT mounts appear to be loose-ish which is signs the spherical bearings are probably on their way out. I imagine Inertia Labs (if they are still around) can rebuild them. If not, a specialty machine or race shop may be able to assist. Replacement bearings should be readily available with basic internet searching (I’ve previously worked with and prefer Aurora Bearings).

I’m also including a set of upper spring perches for the HVT mounts that are for conversion to linear springs. There are notes about linear spring conversations on the Bilsteins in the suspension forum (I believe from Race Comp Engineering - RCE), I just never got around to it myself.

$500 for the Bilsteins
$150 for the LCAs

pm for the lca