Quote:
Originally Posted by Pat
Thank you for the feedback, Bach415. That's helpful. My tires are nearly new. But not I'm more inclined to get a second pair of eccentric bolts.
I wonder if there is something about the Bilstein springs that limits camber more so than 60 mm springs. I don't think that's the case, but I suppose it's possible.
|
I can't tell you for sure if the stock progressive springs are limiting it since I am running 60mm linear springs on the fronts for the entire time I have had them (fronts are revalved and also it was purchased off a previous owner that way). But I have been running this set up for roughly 30-40k miles already and have never ran into the issue of the bolts slipping or losing camber. Car has been tracked before as well (not often since it's DD).