Quote:
Originally Posted by NaturallyAspirated
Car: BRZ w/ Perf Package (Brembos) - completely stock
Tracks: Laguna Seca, Thunderhill East/West, Buttonwillow
Tires: I'll be on the stock Primacies for the first event or so, but will swap in some 200tw tires (RS4 most likely) afterwards.
Experience: I've driven in about 10 track events with my previous car and was running Carbotech XP10 and XP8s.
Looking to attend some track events in the near future for the first time with the BRZ. I've narrowed down my pad choices to Winmax W5 or PMU Club Racer.
Does anyone have a recommendation to go with one over the other? Do they leave any sort of transfer layer that would prevent me from swapping in the stock pads for street use?
|
What about 1521s for the street. I run 10/8s on my NA frs. They do leave a transfer layer but with the xp10/8 and 1521s you can use the same rotors.
Sent from my GM1915 using Tapatalk
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber
JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85
RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid
ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's