|
Ok
vin is not like ZA1JN10C thats the ecu calid
if the ecu flash failed the calid eill be rubvish or not there so dont worry
Dont try to read ecu or do query ecu on a part programmed ecu you jist get rubbish amd failures
Do as in the ecutek recovery
Remve battery terminal replace terminal
Then Turn ignition on and do the recovery straight away
dont try and start car do do query ecu
Manually select vehicle type and ecu type
select a stock om of correct ecu calid and then flash it
you may need to get tuner or ecutek to re issue flash points as you likely lost ecutek licience in ecu
|