Mega update time!
I have been very busy working on the car.
First off, the dry sump pan is all done. Since my last post I added all the weld-on bungs required. 2 scavenge stage bungs which accept a -12 AN fitting with mesh filter screen and the -10 AN turbo drain.
turbo oil drain
These are actually M4 Rivnuts that I flash tacked on with the Tig. I needed something to hold down the small windage tray I made.
This is the finished pan, it has been painted with engine enamel which has been baked in the oven for an hour.
I'm very happy with how good it turned out and it cost me very little money to make.