I have 2013 US FRS no OEM fog lights. I bought Winjet Fog light kit. Everything under the hood is fine. I am getting stuck on the hookup up the Red power line. Getting various answers and just looking for one that is not going to turn on the ejector seat..... So you got the Yellow Wire coming in from the engine bay Via Firewall. The yellow wire connects to the harness which has 3 wires. Ground, Red Power, and connector to a supplied dash button. The question is where is the best place to put the Red wire. Ie I see videos with it spliced into a Green wire, I see videos with it under the fuse, I see a video with it going to a purple wire. In this video
he tries two solutions under the 15 amp fuse and Cutting into an unknown green Accessory wire. Could you use this unused harness that is taped up in by internal fuse section? See the picture below. Don't really want to use supplied T-Clip, I don't want to wrap the cable under a fuse.
I don't want to use a Fuse-Tap unless this is the best option and if so where to. because then I will need a new taller fuse cover printed out.
If I made you confused I am sorry. Let me know what I can do to sort out any questions.