Quote:
Originally Posted by robv666
Just wondering if anyone has had their car Dyno tuned at Harrop in Melbourne?
What were the results?
Good experience?
Sent from my iPhone using Tapatalk
|
Yes, my install complete with tuning was done at Harrop HQ. 226kw on E50 mix. I had issues with idle and car almost stalling when I picked it up. Took it back after a week and while better it's still not what I would call perfect on either E85 or 98, which I rarely use anymore. Idle seems to be the main issue. Can idle between 1200 and 600 depending on how hot feels on the day.
I'm going back in JHune/july for the 82mm pulley, from the 85mm, so I'll raise my concerns then. The problem is that I had my install done in January 2020, summer here for those in the northern hemisphere, meaning it was impossible to tune for cold weather and startup. The offer to bring the car back in winter and leave if for 24hrs to get properly could would be a nice option. Obviously after a pull or two the cars at operating temps so its probably not doable.