Ever since I joined the forum, I have been scrolling through the Member's Car Journals looking for new ideas and what modifications I want to do next. With this being said, I'd like to dive into my personal build a little bit and hopefully can offer some ideas for other members.
I purchased my BRZ back in October of 2015. One of my best friends drove me a couple of hours west to Hamilton, Ohio, where Bilstein of America is located. I purchased the car from a Bilstein engineer, so I was lucky enough that the car already had Bilstein B16 coilvers installed. Apart from the coilovers, the car was bone stock. Below is a photo of my first day of ownership.
If you know me well enough, you know the car didn't stay stock for long. In the following thread, I will go through everything that has been modified on the car to date.
Above is a photo of how the car currently sits. Below is my complete build list along with some photos of said components.
Aerodynamics- Verus Engineering V1X
- Verus Engineering Composite Adjustable Front Splitter with Professional Awesome Splitter Diffusers
- Verus Engineering 2013-2016 BRZ Air Dam
- Verus Engineering Splitter Endplates
- Verus Engineering Dive Plane Kit
- Verus Engineering Hood Louver Kit
- Verus Engineering Carbon Side Marker Delete Kit
- Verus Engineering Composite Side Splitter Kit
- Verus Engineering Composite Rear Spat Kit
- Verus Engineering Trans Tunnel Cover
- Verus Engineering Aggressive Rear Diffuser
- Verus Engineering Rear Suspension Cover Kit
- TRD Style Ducktail
Engine- GrimmSpeed Cold Air Intake
- Tomei Expreme UEL Header
- Invidia N1 Cat-Back Exhaust
- Delicous Tuning Flex Fuel Kit
- Racer X Oil Cooler Kit
- Tune by Marin Nelson
- Verus Engineering ECU Bracket/Fuel Rail Covers
- Verus Engineering Bellhousing Cover
- Verus Engineering Front Cam Sensor Cover Kit
- Verus Engineering Air Oil Separator
- Verus Engineering Rear Cam Cover Block Kit
- Verus Engineering AOS Drain Back Kit
- Verus Engineering AOS Coolant Add-On Kit
- Verus Engineering Throttle Pedal Spacer
Suspension- Bistein B16 Coilovers
- Verus Engineering Camber Plates
- Verus Engineering Rear LCAs
- Eibach 2-Way Adjustable Anti-Roll Kit
Wheels, Tires, and Brakes- Enkei NT03 (18"x9.5" +40)
- Bridgestone Potenza RE-71R (255/35)
- Verus Engineering Brake Cooling Kit
- Hawk HP+ Brake Pads
I'm sure there is something I am forgetting, but that's my build in a nutshell.