|
After supercharging my car, I went through and fitted, a few different cooling options, to get to the point I am at now (the cooling is now fully capable in any situation)
I started with fitting an external oil cooler (with its own fan) behind a cut out in the fog light area...with an air exit into the wheel well.
I fitted a Mishimoto radiator and their twin fans in their shroud.
This all worked OK until I put on the smallest pulley and a built motor ... then in very hot conditions, and under extreme use... the temperatures could rise to above 106c.
So I fitted a PWR radiator and twin Spal (high volume) fans, adapted into a modified and enlarged Mishimoto shroud. The fans draw power directly from the battery.
The functional difference is very very impressive.
|