I really want to get some camber in the front and get an alignment. I might eventually get lowering springs and/or Whiteline com C camber/caster mount but I want to first start with the cheapest route and did some research on camber bolts but still have some questions.
It seems like what we want to do to gain some camber up front is by replacing the upper struct bolt with one of these options:
A) OEM bolts. Either Subaru part # 901000394 or Toyota/Scion part # SU003-02818
B) Subaru concentric bolt part # 20540AA090 used on the Imprezas
C) Whiteline- Camber Adj Bolt Kit 14mm P/N: kca414
D) H&R Camber adjustment bolts
So here are the questions:
1) For option A, I know they are essentially the lower struct bolts. Is there a difference between 901000394 and SU003-02818 or they are the same bolt?
2) For Option A, these are just smaller diameter bolts so does that mean there are no fine tune adjustments that can be made? They are not even "camber bolts" right?
3) For Option A, any concerns with them slipping?
4) For Option B, have anybody tried these concentric bolts and are they adjustable?
5) For Option C, are these the best ones to get? Keep in mind that I don’t need to comply with any rules, just looking for the best solution. I believe they allow fine tune adjustability and won't slip. Is price the only drawback?
6) For Option D, I don't even know where to get them. Are these it?
http://www.hrsprings.com/products/triple-c.
Thanks.