Quote:
Originally Posted by EndlessAzure
@ Hamza Does the installation manual have a reference on how to set-up the preload and height adjustment collars to factory recommendation? If there are, it will also tell you where the car will sit relative to stock when set-up according to the recommendation. This will be part of the total drop the coils are capable of.
Then, you can adjust from there using the lever ratio (1:1 in the front, 1:1.3 in the rear) |
These coils don't have preload, and the recommended height was pretty much identical to stock. I think I have the rear figured out now tbh, cause I'm somewhat content with it and it's rubbing on the inner fendor (there's a widebody on). Should I just trim the inner fendor more?