Quote:
Originally Posted by aseylys
Unfortunately, I don't have a friend who owns a car that I could read.
I also tried unplugging the battery and waiting like 15 for the residual to die out and tried again to no avail.
But I did make a little headway because I was able to get it to log using the SD Card.
Here is the logcfg.txt I used and the log0001.csv (that I had to convert to .txt to upload) that it outputted . At least now I know that the thing is able to (at minimum) talk to the ECU.
But then I tried reading with ECUFlash, same errors and no connection possible.
|
OK im pretty sure ecu is locked by tune
If tactrix reads ecu log data connection is good.
but if its cannot get past the seed/key challenge then that indicated its been changed by another tune system
Unfortunatly i dont have a list of the CVN checksum verification number VS ecu calid as this would tell you if its non stock.
But im pretty certian you car is ecu locked.
do you know anyone with an ecutek cable kit if they do a query ECU and it says ecu has licience its ecutek.
you could also try pulling back on cruise stalk for a couple of seconds with engine running if tacometer jumps to 1000/2000/3000 or 4000 it ecutek tune