|
Next weekend, I'll have time to fabricate a few more tubes.
I'll also be working with TBBandit (FR-S) to make a different intake system based on this design. What we will do is build a new extended pipe, connect it to the throttle body with a coupler, will be longer by a few inches towards the front of the car, then a 90 degree coupler on that towards the drivers side, a MAF adapter, then a cone filter. We will retain the front side of the stock airbox and will be putting a heatshield on the rear of the filter. This will pretty much encase the filter to have the stock CAI blow on it, and yet, provide a very deep growl and added horsepower. We've got all the raw materials inbound for this project next weekend. Thanks for the support!
|