|
I bought the car with roughly ~3k miles, and everything was stock (per the dealer).
The battery is brand new too, so it's reading 12.58V and just for good measure I've got it hooked up to the charger that's giving it 12V/6A.
BRZ is selected under the Car Select menu after every time I reopen ECUFlash.
I bent the pins inward for good measure, but I know my OBD port is good because before throwing on the Tactrix I had an OBDII BT thingy that worked great.
I even got another chord (1ft long) to try.
And at the end of all this tinkering, I'm still receiving the exact same error message in the log.
Hopefully we figure this out.
|