Hello all, I been racking my brain on installing this camera. I am good on the reverse signal (pink wire in kick panel) that gets added to pin 2 on the 28 pin connector. What im confused on is the 6v power source for the camera.
this is the kit I got
https://camerasource.com/automotive-...amera-kit.html
I have a Kenwood DNX6904 with a Maestro RR already installed. I cant seem to find the blue/yellow wire from the maestro that supplies the 6v signal to the camera.
Is it on a sub harness that is not plugged onto the RR?
I assume that will go to the red wire on the camera, and of course the black will be a ground.
this thread helped a little
https://www.ft86club.com/forums/show...5&postcount=20
Other forums seem to agree that there should be a 6V blue/yellow wire on the RR, I cant find it
Thanks for the help
JC