Quote:
Originally Posted by steverife
The SSC kits get you more than -3 degrees from camber with Eibach Pro Plus springs and SPC camber bolts. That is a 17x8 wheel, et40. You might get less camber before you put your wheel into your strut with an 9.5" wheel, but you should still be able to get plenty of camber.
With that said, I can't really imagine the car not understeering with Falken FK510's. You just aren't going to have a lot of front grip.
|
Koni yellow have a bigger upper hole that oe struts don't have for that little extra camber. Without it and with the spc+oe bolts best you'll do is -2.5 ish iirc. I think you're underestimating how much less camber you get with a 1.5" wider wheel, even 5mm offset (45et) is a few tenths less camber on the ssc package and you can't hit -3.0°