Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Compelica · 12-20-2020, 05:48 AM

Just did a test with a splitter with a generic ELM OBD2 (with Torque) and my Tactrix for logging. While I wasn't sure the Tactrix was logging right but my Mode21 PIDs in Torque started spitting incorrect values, particularly oil temp and fuel gauge. Common PIDs (coolant temp, intake temp, ambient temp) worked fine. Not sure if it was a glitch but I intended to do some logging for an hour's drive so I couldn't have the Tactrix log screw up - might try other options later.

12-20-2020, 05:48 AM	#13
Compelica Senior Member Join Date: Apr 2019 Drives: 86 GT Location: Malaysia Posts: 397 Thanks: 262 Thanked 229 Times in 119 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Just did a test with a splitter with a generic ELM OBD2 (with Torque) and my Tactrix for logging. While I wasn't sure the Tactrix was logging right but my Mode21 PIDs in Torque started spitting incorrect values, particularly oil temp and fuel gauge. Common PIDs (coolant temp, intake temp, ambient temp) worked fine. Not sure if it was a glitch but I intended to do some logging for an hour's drive so I couldn't have the Tactrix log screw up - might try other options later. Last edited by Compelica; 12-20-2020 at 10:55 AM.