Quote:
Originally Posted by Jdmjunkie
No shims and the original grease burned off it the first two stops lol. The way I describe how they sound is like bus or industrial truck brakes. They make noise but it should be bearable. I have ridden in cars with Hawk track pads and those pads squeal like a banshee if you even look at them, warm or cold.
My best recommendation is to keep bedding them until the noise goes away. Also if you can take a picture of your rotors so the thread can see how much pad material has been deposited.  |
I'm going to pull everything apart this weekend to clean off the ejected shim grease. I'll put it back together without any grease.
I had the blue hazing and smell after I bed them in the first two times. What should the rotors look like now?
front:
rear:
