Quote:
Originally Posted by BRZ FTW
You using any sort of shim?
I went though the full bedding process twice. I actually managed to boil my fluid the second time. I then bled the brakes, running 2L of Motul through to get as much of factory fluid out using a power bleeder.
I added the Ti shims and grease to try and reduce the crazy squeal I get. It cut out about 50% but, if I scrub a good amount of speed down to <15mph or so, they can squeal so loud its painful with the windows down. Like coming down main 55mph road to turn into side street.
I get these are track pads, I don't expect them to be quiet. I just didn't expect them to be so insanely loud.
|
No shims and the original grease burned off it the first two stops lol. The way I describe how they sound is like bus or industrial truck brakes. They make noise but it should be bearable. I have ridden in cars with Hawk track pads and those pads squeal like a banshee if you even look at them, warm or cold.
My best recommendation is to keep bedding them until the noise goes away. Also if you can take a picture of your rotors so the thread can see how much pad material has been deposited.
