|
More than likely your clutch fork. When your throw out bearing goes theres likely some noise associated. Mine squealed like a stuck pig. Check for leaks around the clutch mc, follow the hydraulic line to the clutch fork and you can remove the piston that pushes the fork with two bolts. Pull back the fork boot and check. The FRS/BRZ/86 chassis has notoriously weak clutch forks. Verus sells a stout one. I highly recommend. 70k miles on the original TOB is pretty good. Either way I think the trans has to be dropped. Might as well do some maintenance while you're in there.
__________________
In the midst of an LS1/T56 swap build page here or follow me on YouTube or IG.
ACT Clutches - APEXi - Buddy Club - Carbing - DBA - Diode Dynamics - Fidanza - HKS - ICT Performance - Project Kics - RPM Transmissions - SEIBON - Sikky Manufacturing - SPC - Tick Performance - TK Style - VERUS - VOLK - Whiteline |