Quote:
Originally Posted by Target70
mine stopped too, but I think my batteries finally died (dual pack: original batteries 2014). I still get the vacuum assist kick when engine is under heavy load but phantom not engaged, then as soon as i trigger the switch, the motor spins up and the voltage drops, and the turbine stops within 1/2 a second, the voltage goes back up and shows good again. I wonder if the auto parts store will check the batteries for me and see if I still have 2 good ones.
|
Mine stopped working recently. It would do the same thing with the vacuum kick and voltage just rising back immediately. My pc680 starter battery was swelling up, corrosion on the negative terminal, the copper bar was a bit loose and my middle dump pack maybe a little swollen. Replaced the starter battery at first but the problem still occurred and I replaced both dump packs. I'm boosting again.