Quote:
Originally Posted by yzf219
So I double checked my bolts and I'm pretty sure they are installed correctly. I marked the bolt head to show where the lobe is. I referenced the SPC instructions and they seem to be installed correctly can anyone please verify. My bolts aren't SPC they are DORMAN bolts but the theory is the same. Thanks
Sent from my SM-G950W using Tapatalk
|
Heres what i would have you do
keep the bottom oem bolt in the bottom hole, and put the camber bolt up top and push the top of the wheel in.
I have learned a fair amount about how people run double digit camber. while we are idiots, we're not stupid. they ALWAYS anchor the bottom hole with the bottom oem bolt. you dont want 2 sketchy connections. people running big camber will get their adjustment from the top hole, either slotting inward, or in your case with a camber bolt, but the bottom hole is ALWAYS oem, that is the anchor that we dont mass with.(im not going to bring up FLCA in this thread)
i know some track people use a camber bolt in bottom and skinny crash bolt up top giving you adjustment from both holes but somehow they dont catch flack, realistically its fine, and so is slotted struts, but who am i.
many people do many different things, different bolts in different holes, but i recommend having the bottom be your anchor. hey, im not a fan of slotting struts either, thats why i got the onimade camber plates.
with the oem bottom bolt in the bottom hole, and an eccentric bolt up top, that will give you camber that is appropriate for the ability of most track enthusiasts.