Quote:
Originally Posted by RToyo86
Pedders top mounts are an option.
|
I use Pedders top mounts which are good for -.75 along with the 14mm camber bolts (bottom hole) and 16mm camber bolts (top hole) and have achieved -2.75 front camber (aligned by Alex at Burning Rubber in Oakville).
Using a pyrometer, the tread surface shows very similar values all across during 8-10 lap sessions at TMP. This with Conti Extreme Contact Sport 245-45-17.
Using Blox LCA's adjusted at -1.5 rear camber, similar even temps are found out back.
After about 6-7 lapping events these tires, which wear incredibly slow, show dead even wear across their width.