Thread: Camber options.
View Single Post
Old 10-14-2020, 01:41 PM   #2
Ashikabi
Senior Member
 
Ashikabi's Avatar
 
Join Date: Aug 2014
Drives: 2013 FR-S
Location: Northwest Iowa
Posts: 7,359
Thanks: 454
Thanked 4,549 Times in 2,950 Posts
Mentioned: 59 Post(s)
Tagged: 5 Thread(s)
Quote:
Originally Posted by yzf219 View Post
Hey guys, wondering how I should proceed. I'm lowered on springs about 1.2 inches. In the front I already have a 14mm camber bolt in the bottom strut hole that is maxed out and the 14mm crash bolt in the top strut hole. Which gives me about -1.8 camber. I would like to get around -2.5.

So my question is, should I replace the 14mm crash bolt that I currently have in the top hole with a 16mm cammed bolt and run camber bolts top and bottom?

Or should I slot the top hole of the bottom strut Mount?

Or should I slot the 3 holes at the top of the strut where the top hat mounts to?

Any help is appreciated. Thank you.

Sent from my SM-G950W using Tapatalk
Get camber plates? Never used them but it seems like that's what they're for. Otherwise I believe the way it's usually done is another cam bolt in the top hole

Sent from my ONEPLUS A5010 using Tapatalk
Ashikabi is offline   Reply With Quote
The Following User Says Thank You to Ashikabi For This Useful Post:
yzf219 (10-14-2020)