[yzf219]

Hey guys wondering how I should get more front camber. I am lowered 1.2 inches on springs. Have 14mm cam bolts in the bottom hole and crash bolts in the top hole. Currently maxed out a -1.8 camber. Would like to achieve -2.5.

So the options I have come up with are,

Option 1, Run a 16mm cam bolt in the strut top hole in addition to the 14mm cam bolt I already have in the bottom hole.

Option 2, slot the top hole in the strut and continue to use the 14mm crash bolt in the top hole along with the 14mm camber bolt in the bottom hole.

Option 3, slot the 3 holes where the strut mounts to the body. However I'm of the understanding that camber at the hub is more desirable than camber achieved at the top of the strut.


Forgot to mention that I do not want to run camber plates as they are far too expensive.

Thanks for the help.