Quote:
Originally Posted by mike_b
Ken at KNS brakes hooked me up. The rear rotors are from an STi application but they are dual drilled and work on the BRZ pp brembos. You do have to trim the metal backing plate of the outside pad to the contour of the pad face and the pad with the squeal tab must go on the inside. The front rotors are 6.0lb lighter per corner and the rear rotors are 5.3lb lighter per corner.
|
Can you clarify the pad mods? You had to create clearance for the pad backing plate to the rotor? (the parking brake "drum"?)
What is the rough cost - fronts are $800/pair? Rears are ?
Thanks.