@
mike_b is running Girodisc 2-piece rotors on his Performance Package Brembos. The rears are dual drilled STi rotors. He also had to do some modifications to the rear pads.
Quote:
Originally Posted by mike_b
The rear rotors are from an STi application but they are dual drilled and work on the BRZ pp brembos. You do have to trim the metal backing plate of the outside pad to the contour of the pad face and the pad with the squeal tab must go on the inside. The front rotors are 6.0lb lighter per corner and the rear rotors are 5.3lb lighter per corner.
|
Sounds like 22.6 lbs of rotational weight savings in just the rotors!
Check out this thread for the details:
https://www.ft86club.com/forums/show....php?p=3363834