Quote:
Originally Posted by ZDan
Some (all?) camber plates significantly cut into available bump travel...
|
Quote:
Originally Posted by Racecomp Engineering
Depends how they deal with the upper spring perch. If they reuse stock you're likely good (but will likely raise ride height).
|
I have Raceseng plates with their spring perches for stock-diameter springs. The radial bearing sits below the spring perch level and takes away about 15mm of bump travel. With the car lowered 30mm , ~45mm bump travel lost, which did not work well with the stock PP Sachs dampers! Not *nearly* enough bump travel... All is well with Bilsteins tho
