Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Drake_93 · 09-12-2020, 08:39 PM

So, I should have added some info. I was running RRv10, I don't have any newer versions for some reason. and I was on ZA1JA01C. Issue in the logs I noticed is the Fuel system status was ALWAYS 0. this seems to be one of the known bugs with the USDM ROMS from v10 and v11... after looking through some of the posts that linked back to this. So, I ran back ROM RRv9.1, and wiped the MAF scaling back to stock and I'm now able to get up close to 1.2g/rev before the car starts to trail off. I think I might be missing a bit of scaling on the PI side to get through that jump but... progress is progress, and I hope this helps anyone else that might be having the issue.

09-12-2020, 08:39 PM	#2
Drake_93 Member Join Date: Jun 2018 Drives: 10-Series Turbo FR-S #2483 Location: Northeast Ohio Posts: 23 Thanks: 8 Thanked 8 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	So, I should have added some info. I was running RRv10, I don't have any newer versions for some reason. and I was on ZA1JA01C. Issue in the logs I noticed is the Fuel system status was ALWAYS 0. this seems to be one of the known bugs with the USDM ROMS from v10 and v11... after looking through some of the posts that linked back to this. So, I ran back ROM RRv9.1, and wiped the MAF scaling back to stock and I'm now able to get up close to 1.2g/rev before the car starts to trail off. I think I might be missing a bit of scaling on the PI side to get through that jump but... progress is progress, and I hope this helps anyone else that might be having the issue.