Quote:
Originally Posted by mike_b
Ken at KNS brakes hooked me up. The rear rotors are from an STi application but they are dual drilled and work on the BRZ pp brembos. You do have to trim the metal backing plate of the outside pad to the contour of the pad face and the pad with the squeal tab must go on the inside. The front rotors are 6.0lb lighter per corner and the rear rotors are 5.3lb lighter per corner.
|
Awesome! Thanks for the info. This is on my list of planned mods.
I think this is the only matching front/rear 2-piece rotor setup available for the PP Brembos.