Quote:
Originally Posted by marco_mc22
How much torque the top nut need?
|
KW instructions say 26ftlb for the front m12x1.25 nut but I couldn't get it to torque with a crowsfoot wrench and didn't want to risk snapping the top of the shaft. I just gave it a decent snug by hand. The nut I used kinda screwed in a bit tightly since there was some leftover loctite on the threads so it's been holding so far. It's 15ftlb for the rear shocks but since I used the vorshlag top mounts, I couldn't use two nuts to lock them together so I put a bit of loctite and torqued it to 15ftlb.