Quote:
Originally Posted by EndlessAzure
If you want DRL, you will need to add a new wire:
- Either through a splice from the DRL resistor power ("traditional method" with high beam flap issue)
- Or a Splice from high beam power with a diode, to prevent the high beam from triggering at night due to the always-on module (this thread).
|
Thank you very much for the quick reply. Would you happen to have a photo of your actual set-up? I've never used a diode before because my wiring skills is just not at that level. Currently have the LED+ wire hooked to the DRL resistor + for DRL but it obviously does not work with the BeatSonic always-on module.
Sent from my Pixel 3 using Tapatalk