Quote:
Originally Posted by Hayseed
Regarding the two "bolts" holding the column to the chassis:
I found they are 14mm "nuts" on bolts as some have said. But also how would everyone rate how hard was it to get those nuts loose? Mine do not budge and I am in danger of rounding the nuts off.
Possible my socket isn't deep enough. Going to get another one to be sure, but I stopped at this point because I'm a bit freaked out the nuts were starting to round. I triple checked I was using a 14mm socket also.
|
I impacted mine on and off. Didn't try it with a hand tool. If you take the dashboard out you can skip those 2 14s ha.
__________________
-Dave
Track cars: 2013 Scion FRS, 1998 Acura Integra Type-R, 1993 Honda Civic Hatchback
DD: 2005 Acura TSX
Tow: 2022 F-450
Toys: 2001 Chevrolet Corvette Z06, 1993 Toyota MR2 Turbo, 1994 Toyota MR2 Turbo, 1991 Mitsubishi Galant VR-4
Parts: 2015 Subaru BRZ Limited, 2005 Acura TSX
Projects: 2013 Subaru BRZ Limited track car build
FS: 2004 GMC Sierra 2500 LT CCSB 8.1/Allison with 99k miles
|