Quote:
Originally Posted by aw11
I just installed the Delicious Flex Fuel Kit for OFT. Since this kit deletes the rear O2 sensor to grab power and ground I went into the tune from Openflash to disable the codes associated with that sensor. However, not all the DTCs are showing up in RomRaider.
I was able to turn off a couple codes (P0037, P0038, P0140) but many of them are not showing up. Today I got P013A while driving around, went in to RomRaider to see if I missed this one, but it wasn't even listed. I believe I have the correct definition file because I got the .bin and the .xml at the same time from Openflash. I opened the xml, scrolled down to the DTCs, and they were all listed. P013A, P0137, P0138, and more are all found in the definition file, but they aren't listed when I open the tune in RomRaider. I haven't checked any of the other tables to see if they're all there or not.
Any idea why I can't see these? Besides that the flex fuel kit and tune seem to be functioning great. Thanks for any help.
|
Correct not as mant dtc are definied in romraider definitions as in ecutek
Two options are rewire kit so it get power and ground feom somewhere else and leave rear 02 connected. I assume its oft flex tune has the sensr wire connected to the ecu EVAP on pin 20 A35 ?? else its not going to owek oft tunes dont support rear 02 signal wire
I can find and disavle the codes in the oft tune but its a bit of miching arround so id need to charge a small fee