Quote:
Originally Posted by Tyrael
Make sure you have the right tools and room to do it yourself. You'll need either low profile ramps as regular ramps will catch on the front lip. Also, if you only have one jack, you'll end up lifting the rear wheel as well as the front to get it high enough to place a jack stand. I'm a bigger guy and I already had two floor jacks. I just lift both sides at the same time and place the jack stands as a safeties if the jacks were to fail. To make things quicker and cleaner I also replaced the drain plug with a Fumoto valve.
|
If I'm only planning to do simple maintenance, do I need jacks, jack stands, etc? I was planning to put the front on a ramp and block the rear tires.
Sent from my SM-N975U using Tapatalk