[soundman98]

the amp does the filtering itself. so the best place to pull the signal for your crossovers is from the wiring at the tweeter.

also important to note: the signal uses 2 wires from the head unit that goes into a 4-pin connector on the tweeter. the tweeter itself shorts each pair of wires together. the other 2 wires go to the 4" midrange.

so disconnecting the tweeter will automatically disconnect the 4" mid, which is going to present a problem for what you're proposing trying to keep it.


given what you want to do for the mean time, i would recommend disconnecting all the speakers in the front, including the 4" speakers, pick up some used oem tweeters off ebay, and gut them so you can use just the connectors to get a signal into the boston crossovers.