Quote:
Originally Posted by welllam
The solution was to settle in with the current conditions, download Failsafe and AEMdata software and find out the difference between display value and logged value mostly targeting the red line area. Then work with your tuner to adjust the difference with some mathematical formula. I worked in this way with motoeast Mike.
|
I have wired up my wideband to ecutek via the evap (CPC). My gauge and ecutek differ a bit. At first it seemed to be consistent .5 or .75. Now its just fluctuating a bit more. Sometims gauge shows 16.75. Ecutek shows 15.82. I have the AEM 30-0300 wideband
And everyone is getting the voltage the 4.5v or 4.12v etc.. i am getting 3.49v maximum and minimum of like 3.48v. I’m not very good at electrical stuff. Could someone with some insight. Im thinking i did something wrong wiring it up. I moved the ground thinking it was a bad ground location but same result.