Thread: FRS won't start
View Single Post
Old 07-27-2020, 11:18 PM   #9
Pop
Junior Member
 
Join Date: Jul 2020
Drives: Scion FR-S 2013
Location: Minnesota
Posts: 6
Thanks: 0
Thanked 5 Times in 5 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
[QUOTE=humfrz;3352522]
Quote:
Originally Posted by Pop View Post

OK.

So, after you put gas in the car, how far did you drive it before it stopped on you? Now, you didn't pump out of a diesel tank did you? (sorry, I had to ask). Was that station your usual fueling place? (bad (water) in the gas)?

Now, when you hear the sound of two metal (what's) rubbing together??), is the engine turning over or just the starter?

Are you on the original battery? Is the battery strong?

Have you had problems like this before?

Does the dash show a CEL?

Do you have a OBD reader that you could read any fault codes?

Come back.
I was on the highway driving 60mph then my car reved on it's own for about 2 secs, right after that I pushed the gas pedal and nothing happened. I pushed it a couple more time and nothing, no acceleration. I had full tank before I entered the highway. I pump 91 at the same Kwik Trip every week. The metal rubbing is coming around the crankshaft area. Battery was working when the car stopped on me. Never had problems with it. When the car died on me my check engine light, oil, and battery went on at the same time and is still on when I put the key in. I don't have a code reader to check. I have a video you guys can look at, put the volume at max. you can hear the problem I'm trying to describe.

PLEASE WATCH VIDEO
I THINK IT WILL HELP FIGURING OUT THE PROBLEM
LINK:
Pop is offline   Reply With Quote
The Following User Says Thank You to Pop For This Useful Post:
humfrz (07-27-2020)