Quote:
Originally Posted by ichitaka05
Finally one of the thing I've ordered have came, so was able to start doing FXT water/oil cooler.
I read a lot of thread which way to do the water/oil cooler. I decided to go with TB route. Overall it wasn't hard to install. Biggest struggle was looping the hose under the AC took a bit of work and putting the clamp on the TB side.
 |
Nice. I had my tubing looped at the gap between the accessory belt and the compressor - routing it behind was causing the tube to kink. Had to secure the hose to the block that it wouldn't contact the belt, but the installation was far easier that way with no sharp bends.