|
If you have a cyclinder that is not firing or misfiring than you are essentially running on 3 cyclinders which is out of balance and out of timing and likely the cause of the knocking/shaking. I would figure out why cyclinder 1 is not firing. I would start with spark plugs because they are cheap. So is fuel injector cleaner. Next up after that is coil packs or fuel injectors. Are you sure it was the right cyclinder you replaced the coilpack on? I mean it's either air, fuel, or spark if it's not firing. (well could be no compression but then you are really screwed so lets just hope not).
Sent from my SM-G975U using Tapatalk
|